If you’re looking for a heating and cooling unit that can be installed in limited space, Goodman Gas Packaged Units are the right choice. Goodman gas/electric packaged units are designed for premium efficiency with energy star ratings available at 14.3 SEER2.
These products have a proven history of reliability and performance worldwide, while offering exceptional value with their integrated design that eliminates the need for supplementary components such as condensate pumps. They’re designed to fit in locations with no attic or basement access, so they can be placed by an outside.
The compact design of these units saves you money on installation costs by making them easier to install and cheaper to ship. Each Goodman gas packaged HVAC system is assembled in a factory-controlled environment using premium materials to ensure unit reliability and performance.
Quality control is important to ensure reliability and performance of all units, which are inspected at every stage of assembly with each part being measured against strict tolerances. All Goodman systems features an industry leading warranty on parts that covers you in the unlikely event there’s an issue with your system.
Standard Features
• Energy-efficient scroll compressor
• Multi-speed ECM indoor blower motor
• Convertible airflow: horizontal or downflow application
• All-aluminum evaporator coil
• Power-assisted combustion
• Direct spark ignition system includes a microprocessor-based control for the entire ignition sequence, all blower operation, and all safety circuits complete with self-diagnostics
• All models comply with California Low NOx standards (40ng/J NOx)
• This furnace does not comply with the SCAQMD Rule 1111 nor the SJVAPCD Rule 4905 14 ng/J NOx emission limit and therefore is not eligible for installation in California’s South Coast Air Quality Management District (SCAQMD) nor the San Joaquin Valley Air Pollution Control District (SJVAPCD)
• AHRI Certified; ETL Listed
Cabinet Features
• High-quality UV-resistant powder-paint finish
• Aluminum foil-facing internal insulation reinforced with fiberglass scrim
• Convenient access panels
• One roof curb fits all units
• Fully insulated cabinet
• Bottom, 2” high base rails for easier handling
• Meets cabinet air leakage requirements when tested in accordance with ASHRAE standard 193
• One footprint for all tonnages
| GPGM34208041 | |
| Cooling Capacity | |
| Total BTU/h | 40,000 |
| Sensible BTU/h | 30,980 |
| SEER / EER | 13.4 / 10.6 |
| Decibels | 78 |
| AHRI Reference #s | 209319538 |
| Heating Capacity (BTU/h) | |
| Input BTU/h | 80,000 |
| Output BTU/h | 64,800 |
| AFUE | 81 |
| Temperature Rise Range | 30 – 60 |
| No. of Burners | 4 |
| Evaporator Motor | |
| Type | ECM |
| Wheel (D x W) | 11” x 10” |
| Indoor Nominal CFM | 1,300 |
| No. of Speeds | 5 |
| Horsepower | 3/4 |
| Evaporator Coil | |
| Face Area (ft²) | 5.68 |
| Rows Deep/Fins per Inch | 4/14 |
| Piston Size (Cooling) | 0.072 |
| Drain Size (NPT) | ¾” |
| Refrigerant Charge (oz.) | 103 |
| Condenser Fan / Coil | |
| Horsepower – RPM | 1/4 – 1,075 |
| Diameter / # of Blades | 22” / 3 |
| Outdoor Nominal CFM | 2,850 |
| Face Area (ft²) | 15.36 |
| Rows Deep/Fins per Inch | 1/24 |
| Compressor | |
| Quantity / Type | 1 / Scroll |
| Stage | Single |
| Compressor RLA/LRA | 17.9 / 112.0 |
| Electrical Data | |
| Voltage-Phase (Frequency 60Hz) | 208/230-1 |
| Indoor Blower FLA | 5.4 |
| Outdoor Fan FLA/LRA | 1.4/ 3.2 |
| Min. Circuit Ampacity ¹ | 29.2 |
| Max. Overcurrent Protection ² | 45 amps |
| Operating / Ship Weights (lbs) | 496 / 520 |
Product Documents
Product Documents
$4,272.00
Out of stock
