5 Ton 15.2 SEER2 InverterCool Variable Speed Heat Pump Split System
Â
Includes:
- InverterCool Wifi Thermostat Included
- 10 Year Manufacturer Parts Warranty once registered for residential installation and 3 Year Manufacturer Parts Warranty for commercial installation.
- 5 Year parts warranty if not registered for residential installation. Condensing units are shipped with the FDD monitoring gateway at no cost and includes one year of InverterCool monitoring for free. An additional 9 years of InverterCool monitoring can be added for $599+applicable tax.
Â
Standard FeaturesÂ
- Comfort. InverterCool Smart Variable Speed (SVS) heat pump outputs flexible capacity from 25%-110% to achieve your desired temperature – no more, no less.
- Quiet. Compressors are equipped with sound blanket.
- Universal match. SVS heat pumps are compatible with most traditional indoor air handlers / furnaces and 24VAC controlled thermostats.
- Refrigerant AUTO charge assistant. SVS insures accurate refrigerant charge for every indoor coils match-up.
- Load learning. Load forecasting technology helps to save energy.
- Back-up running. Continuous operation with maximum 2 failed sensors.
InverterCool Fault Detection and Diagnostics Features
- 24×7 monitoring service (Up to 2 months history data on InverterCool FDD App).
- Diagnostic and alerts service.
- InverterCool FDD App reminds dealers and homeowners of valuable service such as refrigerant leakage/shortage and home inefficiency etc.
REMARKS:
1. Tested and rated in accordance with AHRI Standard 210/240-2017.
2. It’s not recommended to run cooling when the ambient temperature is below 50°F, the heating operating range can lower down to -22°F by field setting(n01).
3. Wire size should be determined in accordance with National Electrical Codes.
4. Must use time-delay fuses or HACR-type circuit breakers of the same size as noted.
5. It may vary based on the actual installation status.
6.Weight shown includes packaging.
COH16S-60AAA 60
| SVS Standard Combination | 5Ton |
| Outdoor Unit Model | COH16S-60AAA |
| Indoor Unit Model | CVTAN-60AA |
| Capacity 1 |  |
| Cooling (BTU/h) | 54000 |
| Heating (BTU/h) | 54000 |
| Operation Range 2 |  |
| Cooling operation range | 40~120℉ |
| Heating operation range | -3~86℉ |
| Compressor | Â |
| RLA | 24.0 |
| LRA | 58.1 |
| Condenser Fan Motor | Â |
| Horse power (HP) | 1/3 |
| FLA | 2.5 |
| Refrigeration System | Â |
| Refrigerant Line Size | Â |
| Liquid Line Size ("O.D.) | 3/8" |
| Suction Line Size ("O.D.) | 7/8" |
| Refrigerant Connection Size | Â |
| Liquid Line Size ("O.D.) | 3/8" |
| Suction Line Size ("O.D.) | 7/8" |
| Cooling Metering Device (Indoor Side) | TXV |
| Heating Metering Device | EEV |
| Maximum Line Length | 100FT |
| Maximum Elevation Difference | 50FT |
| Charging Specifications | Â |
| Superheat at Service Valve | 10℉ (±2℉) |
| Sub-cooling at Service Valve | 8℉ (±2℉) |
| Electrical Data | Â |
| Voltage-Phase-Hz | 208/230-1-60 |
| Minimum Circuit Ampacity 3 | 32.5 |
| Max. Over-current Protection 4 | 50 |
| Allowed Volts Range | 187~253 |
| Condenser Decibels (dB) 5 | 72/66/62 |
| Equipment Weight (lbs.) | 190 |
| Ship Weight (lbs.) 6 | 220 |
Standard Features
– ECM Motor
– Multi-position installation. (Vertical up-flow and horizontal right-flow)
– Multiple electrical entry locations.
– Field installed electric heat kits 5, 10, 15, 20KW.
– Two front panels (upper and lower) design for ease of maintenance.
– Slide rail design for motor and coil for ease of installing and servicing.
– Horizontal and vertical drain pan pre-installed.
– Primary and secondary condensate drain fittings.
REMARKS:
1. Tested and rated in accordance with AHRI Standard 210/240-2017.
2. Wire size should be determined in accordance with National Electrical Codes.
3. Must use time-delay fuses or HACR-type circuit breakers of the same size as noted.
CVTAN-60AA
| Model | CVTAN-60AA |
| Capacity 1 | Â |
| Nominal Cooling (BTU/h) | 54000 |
| Nominal Heating (BTU/h) | 54000 |
| Blower | Â |
| Diameter | 11" |
| Width | 10 5/8" |
| Fan Motor | Â |
| Horsepower (HP) | 3/4 |
| Full Load Ampacity | 6.0 |
| Refrigeration System | Â |
| Refrigerant Line Size | Â |
| Liquid Line Size (O.D.) | 3/8" |
| Suction Line Size (O.D.) | 7/8" |
| Refrigerant Connection Size | Â |
| Liquid Line Size (O.D.) | 3/8" |
| Suction Line Size (O.D.) | 7/8" |
| Metering Device | TXV |
| Heating Metering Device (ODU side) | EEV |
| Coil Drain Connection (NPT) | 3/4" |
| Decibels (dB) | Â |
| High Speed (Tap 5) | 67 |
| Medium High Speed (Tap 4) | 63 |
| Medium Speed (Tap 3) | 61 |
| Electrical Data | Â |
| Voltage-Phase-Hz | 208/230-1-60 |
| Minimum Circuit Ampacity 2 | 7.5 |
| Max. Over-current Protection 3 | 15 |
| Volts Range | 187~253 |
| Air Filter | Â |
| Air Filter Size (in.) | 22×20 |
| Weight | Â |
| Equipment Weight (lbs.) | 172 |
| Ship Weight (lbs.) | 207 |
The InverterCool CPT100 Wi Fi Thermostat is an economical, full featured, connected thermostat
which is simple to install, configure and operate.
• Connects easily to 2.4GHz Wi Fi networks
• Control from your phone,tablet or Alexa and Google Home devices
• Large LCD Display with Touch keys
• 5 powered relay outputs accommodate a wide variety HVAC and hydronic systems
– 2 Heating 2 Cooling outputs for conventional HVAC and hydronic systems
– 3 Heating 1 Cooling outputs for heat pump applications
Product Documents
Product Documentation
- InverterCool Out Door Unit Specs
- InverterCool Air Handler Specs
- InverterCool Wifi Thermostat Specs
- Inverter Cool AHRI Matchups and Ratings
- InverterCool Owner's Guide - Heat Pump System
- Application Guide - Smart Thermostat
- InverterCool Quick Start Up Guide
- Installation Manual - Indoor Unit
- Installation Manual - Outdoor Unit
- Installation Manual - FDD
- Installation Manual - Smart Thermostat
- InverterCool Limited Part Warranty Sheet
$7,667.00 – $7,742.00
-
