4 Ton 16 SEER2 InverterCool Variable Speed Heat Pump Split System
4 Ton 16 SEER2 InverterCool Variable Speed Heat Pump Split System
Includes-
-InverterCool Wifi Thermostat Included
Â
-10 Year Manufacturer Parts Warranty once registered for residential installation and 3 Year Manufacturer Parts Warranty for commercial installation. 5 Year parts warranty if not registered for residential installation.
-Condensing units are shipped with the FDD monitoring gateway at no cost and includes one year of InverterCool monitoring for free. An additional 9 years of InverterCool monitoring can be added for $599+applicable tax.
Standard FeaturesÂ
1. Comfort. InverterCool Smart Variable Speed (SVS) heat pump outputs flexible capacity from 25%-110% to achieve your desired temperature – no more, no less.
2. Quiet. Compressors are equipped with sound blanket.
3. Universal match. SVS heat pumps are compatible with most traditional indoor air handlers / furnaces and 24VAC controlled thermostats.
4. Refrigerant AUTO charge assistant. SVS insures accurate refrigerant charge for every indoor coils match-up.
5. Load learning. Load forecasting technology helps to save energy.
6. Back-up running. Continuous operation with maximum 2 failed sensors.
InverterCool Fault Detection and Diagnostics Features
1. 24×7 monitoring service (Up to 2 months history data on InverterCool FDD App).
2. Diagnostic and alerts service.
3. InverterCool FDD App reminds dealers and homeowners of valuable service such as refrigerant leakage/shortage and home inefficiency etc.
REMARKS:
1. Tested and rated in accordance with AHRI Standard 210/240-2017.
2. It’s not recommended to run cooling when the ambient temperature is below 50°F, the heating operating range can lower down to -22°F by field setting(n01).
3. Wire size should be determined in accordance with National Electrical Codes.
4. Must use time-delay fuses or HACR-type circuit breakers of the same size as noted.
5. It may vary based on the actual installation status.
6.Weight shown includes packaging.
Â
COH16S-60AAA 48
| SVS Standard Combination | 4Ton |
| Outdoor Unit Model | COH16S-60AAA |
| Indoor Unit Model | CVTAN-48AA |
| Capacity 1 |  |
| Cooling (BTU/h) | 45000 |
| Heating (BTU/h) | 46000 |
| Operation Range 2 |  |
| Cooling operation range | 40~120℉ |
| Heating operation range | -3~86℉ |
| Compressor | Â |
| RLA | 24.0 |
| LRA | 58.1 |
| Condenser Fan Motor | Â |
| Horse power (HP) | 1/3 |
| FLA | 2.5 |
| Refrigeration System | Â |
| Refrigerant Line Size | Â |
| Liquid Line Size (“O.D.) | 3/8″ |
| Suction Line Size (“O.D.) | 7/8″ |
| Refrigerant Connection Size | Â |
| Liquid Line Size (“O.D.) | 3/8″ |
| Suction Line Size (“O.D.) | 7/8″ |
| Cooling Metering Device (Indoor Side) | TXV |
| Heating Metering Device | EEV |
| Maximum Line Length | 100FT |
| Maximum Elevation Difference | 50FT |
| Charging Specifications | Â |
| Superheat at Service Valve | 10℉ (±2℉) |
| Sub-cooling at Service Valve | 8℉ (±2℉) |
| Electrical Data | Â |
| Voltage-Phase-Hz | 208/230-1-60 |
| Minimum Circuit Ampacity 3 | 32.5 |
| Max. Over-current Protection 4 | 50 |
| Allowed Volts Range | 187~253 |
| Condenser Decibels (dB) 5 | 70/64/61 |
| Equipment Weight (lbs.) | 190 |
| Ship Weight (lbs.) 6 | 220 |
Standard Features
– ECM Motor
– Multi-position installation. (Vertical up-flow and horizontal right-flow)
– Multiple electrical entry locations.
– Field installed electric heat kits 5, 10, 15, 20KW.
– Two front panels (upper and lower) design for ease of maintenance.
– Slide rail design for motor and coil for ease of installing and servicing.
– Horizontal and vertical drain pan pre-installed.
– Primary and secondary condensate drain fittings.
REMARKS:
1. Tested and rated in accordance with AHRI Standard 210/240-2017.
2. Wire size should be determined in accordance with National Electrical Codes.
3. Must use time-delay fuses or HACR-type circuit breakers of the same size as noted.
REMARKS:
1. Tested and rated in accordance with AHRI Standard 210/240-2017.
2. Wire size should be determined in accordance with National Electrical Codes.
3. Must use time-delay fuses or HACR-type circuit breakers of the same size as noted.
COH16S-60AA+CVTAN-48A
| SPEC | |
| AHRI Reference No. | 207742357 |
| Model Status | Active |
| Condenser | COH16S-60AA |
| Air Handler | CVTAN-48A |
| Cooling Capacity | 45000 |
| SEER2 | 16 |
| EER2 | 10.4 |
| Heating Capacity | 46000 |
| HSPF2 | 8.5 |
| 25C TAX CREDIT | / |
| Energy Star | / |
| Outdoor Dims (W x D x H) | 29.1''x 29.1'' x 33.2'' |
| Indoor Dims (W x D x H) | 24.5"x 21"x 56" |
| Recommended Area | 1950~2200 Sqf |
| Packaged Total Weight | 432 Lbs |
The InverterCool CPT100 Wi Fi Thermostat is an economical, full featured, connected thermostat
which is simple to install, configure and operate.
• Connects easily to 2.4GHz Wi Fi networks
• Control from your phone,tablet or Alexa and Google Home devices
• Large LCD Display with Touch keys
• 5 powered relay outputs accommodate a wide variety HVAC and hydronic systems
– 2 Heating 2 Cooling outputs for conventional HVAC and hydronic systems
– 3 Heating 1 Cooling outputs for heat pump applications
Product Documents
Product Documentation
- InverterCool Out Door Unit Specs
- InverterCool Air Handler Specs
- InverterCool Wifi Thermostat Specs
- Inverter Cool AHRI Matchups and Ratings
- InverterCool Owner's Guide - Heat Pump System
- Application Guide - Smart Thermostat
- InverterCool Quick Start Up Guide
- Installation Manual - Indoor Unit
- Installation Manual - Outdoor Unit
- Installation Manual - FDD
- Installation Manual - Smart Thermostat
- InverterCool Limited Part Warranty Sheet
$6,556.00 – $6,631.00
-
