Standard Features
• Energy-efficient compressor
• Factory-installed filter drier
• Fully charged for 15’ of tubing length
• Copper tube/aluminum fin coil
• Service valves with sweat connections and easy-to-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified
• ETL Listed
Cabinet Features
• Heavy-gauge galvanized-steel cabinet with a louvered sound control top
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Wire fan discharge grille
• Steel louver coil guard
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets the 2017 Florida Building Code unit integrity requirements for hurricane-type winds
(Anchor bracket kits available.)
Standard Features
• Integrated communicating ComfortBridge™ Technology
• Commissioning and diagnostics via on board Bluetooth with the CoolCloud phone and tablet application
• Heavy-duty aluminized-steel tubular heat exchanger
• Stainless-steel secondary heat exchanger
• Two-stage gas valve provides quiet, economical heating
• Durable Silicon Nitride igniter
• Quiet two-speed induced draft blower
• Compatible with any single-stage thermostat
• Self-diagnostic control board with constant memory fault code history output to a triple 7-segment display
• Color-coded low-voltage terminals with provisions for
electronic air cleaner
• Efficient and quiet variable-speed airflow system gently ramps up or down according to heating or cooling demand
• Multiple continuous fan speed options offer quiet air circulation
• Auto-Comfort and enhanced dehumidification modes available
• All models comply with California 40 ng/J Low NOx emissions standard
• For installation in California’s South Coast Air Quality Management District (SCAQMD) only:
This furnace does not meet the SCAQMD Rule 1111 14 ng/J NOx emission limit, and thus is subject to a mitigation fee of up to $450. This furnace is not eligible for the SCAQMD Clean Air Furnace Rebate Program:
www.CleanAirFurnaceRebate.com.
Cabinet Features
• Designed for multi-position installation — upflow, horizontal left or right
• Certified for direct vent (2-pipe) or non-direct vent (1-pipe)
• Easy to install top venting with optional side venting
• Convenient left or right connection for gas and electrical service
• Cabinet air leakage (QLeak) ≤ 2%
• Heavy-gauge steel cabinet with durable baked-enamel finish
• Fully insulated heat exchanger and blower section
• Airtight solid bottom or side-return with easy-cut tabs for effortless removal in bottom air-inlet applications
Standard Features
• All-Aluminum evaporator coil
• Optimized for use with R-410A refrigerant
• Some models suitable for use with R-410A or R-22 refrigerant
• CAPT, CAPTA, CHPT, CHPTA models feature factory-installed thermal expansion valves for cooling and heat pump applications
• CAPF, CAPFA, CAUF, CAUFA, CHPF, CSCF models feature a check flowrator for cooling and heat pump applications
• Vertical and horizontal models available
• 21” depth for easier attic access
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Rust resistant, thermoplastic drain pans featuring a low water-retention design
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• UV-resistant drain pan
• AHRI certified; ETL listed
California Residents- Proposition 65
| GM9S800603BN | GSXN403010 | CAPFA3626B6 | |||||
| Heating Capacity | Capacities | Unit Dimensions | |||||
| Input | 60,000 | Nominal Cooling (BTU/h) | 30,000 | W | 17½” | ||
| Natural Gas Output | 48,000 | Decibels (dBA) | 72.0 | D | 21″ | ||
| LP Gas Output | 48,000 | Compressor | H | 26″ | |||
| AFUE ¹ | 80 | RLA | 11.6 | A | 22″ | ||
| Available AC @ 0.5” ESP | 3 | LRA | 59 | Nominal Tons | 3 | ||
| Temperature Rise Range (°F) | 20-50 | Stage | Single | Connection | |||
| Circulator Blower | Type | Rotary | Liquid | ⅜” | |||
| Size (D x W) | 10″ x 8″ | Condenser Fan Motor | Suction | 7/8” | |||
| Horsepower @1075 RPM | 0.5 | Motor Type | PSC | Piston Size | 0.065 | ||
| Speed | 9 | Horsepower | 1/6 | Ship Weight (lbs) | 47 | ||
| Vent Diameter ² | 4″ | FLA | 0.95 | ||||
| No. of Burners | 3 | Refrigeration System | |||||
| Electrical Data | Refrigerant Line Size | ||||||
| Min. Circuit Ampacity ³ | 8.7 | Liquid Line Size (“O.D.) | ⅜” | ||||
| Max. Overcurrent Device (amps) ⁴ | 15 | Suction Line Size (“O.D.) | ⅞” | ||||
| Ship Weight (lbs) | 100 | Refrigerant Connection Size | |||||
| Liquid Valve Size (“O.D.) | ⅜” | ||||||
| Suction Valve Size (“O.D.) | ⅞” | ||||||
| Valve Type | Sweat | ||||||
| Refrigerant Charge | 79 | ||||||
| Electrical Data | |||||||
| Voltage-Phase (60 Hz) | 208/230-1 | ||||||
| Minimum Circuit Ampacity | 15.5 | ||||||
| Max. Overcurrent Protection | 25 | ||||||
| Min / Max Volts | 197/253 | ||||||
| Electrical Conduit Size | ½” or ¾” | ||||||
| Equipment Weight (lbs) | 156 | ||||||
| Ship Weight (lbs) | 180 |
$3,834.00
Out of stock
