13.4 SEER 2 is the minimum efficiency level that is required by law. A unit rated at this efficiency level will use around 20% less energy than a standard unit. You may have heard the term “package unit” used in reference to a heating and cooling system. The name comes from the fact that it’s self-contained, which means that all of its components are located in one place instead of spread throughout your home or apartment. This SEER 2 package unit is designed to be used with mobile homes and modular homes. This gas heating, cooling and central air conditioning unit provides a building with both heating and cooling as well as humidity control. Packaged units are often found in mobile homes and modular homes, but they can also be installed in conventional residential structures.
Standard Features
• Energy-efficient scroll compressor
• Multi-speed ECM indoor blower motor
• Convertible airflow: horizontal or downflow application
• All-aluminum evaporator coil
• Power-assisted combustion
• Direct spark ignition system includes a microprocessor-based control for the entire ignition sequence, all blower operation, and all safety circuits complete with self-diagnostics
• All models comply with California Low NOx standards (40ng/J NOx)
• This furnace does not comply with the SCAQMD Rule 1111 nor the SJVAPCD Rule 4905 14 ng/J NOx emission limit and therefore is not eligible for installation in California’s South Coast Air Quality Management District (SCAQMD) nor the San Joaquin Valley Air Pollution Control District (SJVAPCD)
• AHRI Certified; ETL Listed
Cabinet Features
• High-quality UV-resistant powder-paint finish
• Aluminum foil-facing internal insulation reinforced with fiberglass scrim
• Convenient access panels
• One roof curb fits all units
• Fully insulated cabinet
• Bottom, 2” high base rails for easier handling
• Meets cabinet air leakage requirements when tested in accordance with ASHRAE standard 193
• One footprint for all tonnages
| GPGM32406041 | |
| Cooling Capacity | |
| Total BTU/h | 23,000 |
| Sensible BTU/h | 18,800 |
| SEER / EER | 13.4 / 10.6 |
| Decibels | 78 |
| AHRI Reference #s | 209319520 |
| Heating Capacity (BTU/h) | |
| Input BTU/h | 60,000 |
| Output BTU/h | 48,600 |
| AFUE | 81 |
| Temperature Rise Range | 30 - 60 |
| No. of Burners | 3 |
| Evaporator Motor | |
| Type | ECM |
| Wheel (D x W) | 10” x 8” |
| Indoor Nominal CFM | 800 |
| No. of Speeds | 5 |
| Horsepower | 1/2 |
| Evaporator Coil | |
| Face Area (ft²) | 4.35 |
| Rows Deep/Fins per Inch | 3/14 |
| Piston Size (Cooling) | 0.057 |
| Drain Size (NPT) | ¾” |
| Refrigerant Charge (oz.) | 75 |
| Condenser Fan / Coil | |
| Horsepower - RPM | 1/6 - 815 |
| Diameter / # of Blades | 22” / 3 |
| Outdoor Nominal CFM | 2,150 |
| Face Area (ft²) | 12.3 |
| Rows Deep/Fins per Inch | 1/24 |
| Compressor | |
| Quantity / Type | 1 / Rotary |
| Stage | Single |
| Compressor RLA/LRA | 7.7 / 38.0 |
| Electrical Data | |
| Voltage-Phase (Frequency 60Hz) | 208/230-1 |
| Indoor Blower FLA | 3.8 |
| Outdoor Fan FLA/LRA | 0.95/2.0 |
| Min. Circuit Ampacity ¹ | 14.4 |
| Max. Overcurrent Protection ² | 20 amps |
| Operating / Ship Weights (lbs) | 417 / 439 |
Product Documents
Product Documents
$3,519.00
Out of stock
