THIS MODEL IS DISCONTINUED. THE GM9S96 IS THE NEW MODEL.
Standard Features
• Heavy-duty aluminized-steel tubular heat exchanger
• Stainless-steel secondary heat exchanger
• Single-stage gas valve
• Durable Silicon Nitride igniter
• Quiet single-speed induced draft blower
• Self-diagnostic control board with constant memory fault code history output to a LED
• All models comply with California 40 ng/J Low NOx emissions standard
• Can no longer be installed in California’s South Coast Air Quality Management District (SCAQMD)
on or after October 1, 2019.
• AHRI Certified; ETL Listed
Cabinet Features
• Designed for multi-position installation — GMES96: upflow, horizontal left or right GCES96:
downflow, horizontal left or right
• Certified for direct vent (2-pipe) or non-direct vent (1-pipe)
• Easy-to-install top venting with optional side venting — GMES96/upflow models only
• Convenient left or right connection for gas and electrical service
• Cabinet air leakage (QLeak) ≤ 2%
• Heavy-gauge steel cabinet with durable finish
• Fully insulated heat exchanger and blower section
• Airtight solid bottom or side return with easy-cut tabs for effortless removal in bottom
air-inlet applications
| GMES960803BN | |
| Heating Data | |
| High Fire Input¹ | 80,000 |
| High Fire Output¹ | 76,880 |
| AFUE² | 96 |
| Temperature Rise Range (°F) | 35-65 |
| Vent Diameter³ | 2″- 3″ |
| No. of Burners | 4 |
| Circulator Blower | |
| Available AC @ 0.5″ ESP | 1.5- 3 |
| Size (D x W) | 11″ x 8″ |
| Horsepower @ 1075 RPM | 1/2 |
| Speed | 5 |
| Filter Size (in²) (Qty) | (1) 16xX 25 (side or bottom) |
| Electrical Data | |
| Min. Circuit Ampacity⁴ | 9.6 |
| Max. Overcurrent Device (amps)⁵ | 15 |
| Shipping Weight (lbs) | 114 |
$1,514.00
Out of stock
