Standard Features
• Two-Stage Copeland Ultra-Tech scroll compressor
• Quiet two-speed ECM outdoor fan motor
• Integrated communicating ComfortBridge™ Technology
• Commissioning and diagnostics via Bluetooth indoor board via CoolCloud™ App
• Copeland® ComfortAlert™ built in diagnostics
• Copper tube/enhanced aluminum fin coil – 5mm on 2.0-3.0T
• Color-coded terminal strip for non-communicating set-up
• Only two low-voltage wires required in communication mode
• Factory-installed filter drier
• Factory-installed transformer
• Factory-installed high and low-pressure switches
• High-density foam compressor sound blanket
• Fully charged for 15’ of tubing length
• Ambient temperature sensors
• Ground lug connection
• AHRI Certified – ETL Listed
Cabinet Features
• Removable grille-style top design compliant with UL 60335-2-40
• Venturi for increased velocity of airflow
• Heavy-gauge galvanized steel cabinet
• Baked-on powder-paint finish with 500-hour salt-spray approval
• Steel louver coil guard with rust-resistant screws.
• Top and side maintenance access
• Single-panel access to controls with space for field-installed accessories
• Service valves with sweat connections and easy-access gauge ports
• When properly anchored, meets the 2020 Florida Building Integrity requirements for hurricane-type winds
(Anchor bracket kits available.)
Energy Star Notes
• Proper sizing and installation of equipment is critical to achieving optimal performance. Split system air conditioners and heat pumps must be matched
with appropriate coil components to meet ENERGY STAR® criteria. Ask your contractor for details or visit www.energystar.gov.
• The www.energystar.gov website provides up-to-date system combinations certified to meet ENERGY STAR® requirements.
¹ Line sizes denoted for 25’ line sets, tested and rated in accordance with ARI Standard 210/240. For other line set lengths or sizes, refer to
the Installation Instructions and/or the Long Line Set Applications guide.
² Installer will need to supply ¾” to ⅞” adapters for suction line connections.
³ Installer will need to supply ⅞” to 1⅛” adapters for suction line connections.
4 Unit is factory charged with refrigerant for 15’ of ⅜” liquid line. System charge must be adjusted per the Final Charge Adjustment
procedure found in the Installation Instructions.
5 Wire size should be determined in accordance with National Electrical Codes; extensive wire runs will require larger wire sizes
6 Must use time-delay fuses or HACR-type circuit breakers of the same size as noted.
GSXC704810
| Model | GSXC704810 |
| Cooling Capacity | |
| Nominal Cooling (BTU/h) | 48,000 |
| Decibels (High/Low) | 74 |
| Compressor | |
| RLA | 20.4 |
| LRA | 122.1 |
| STAGE | Two |
| TYPE | Scroll |
| Condenser Fan Motor | |
| Motor Type | ECM |
| Horsepower (RPM) | ⅓ |
| FLA | 2.8 |
| Refrigeration System | |
| Refrigerant Line Size¹ | |
| Liquid Line Size (“O.D.) | ⅜" |
| Suction Line Size (“O.D.) | 1⅛" |
| Refrigerant Connection Size | |
| Liquid Valve Size (“O.D.) | ⅜" |
| Suction Valve Size (“O.D.") 2, 3 | ⅞" |
| Valve Connection Type | Sweat |
| Refrigerant Charge4 | 195 |
| Expansion Device | TXV |
| Electrical Data | |
| Voltage-Phase-Hz | 208/230-1 |
| Minimum Circuit Ampacity 5 | 28.3 |
| Max. Overcurrent Protection 6 | 45 |
| Min / Max Volts | 197 / 253 |
| Electrical Conduit Size | ½" or ¾" |
| Equipment Weight (lbs) | 276 |
| Ship Weight (lbs) | 298 |
| ENERGY STAR® Certified ^ | YES |
Product Documents
Product Documents
$3,512.00
Out of stock
