Install Kit Includes:
* 30′ Copper Insulated Line Set
* Drain Float Switch
* 6′ Electrical Whip
* 60 amp non fused disconnect
* Plastic Condenser Pad
* Digital Thermostat
* Heat Strip up to 10 kw
Standard Features
• Energy-efficient compressor
• Factory-installed filter drier
• Fully charged for 15’ of tubing length
• Copper tube/aluminum fin coil
• Service valves with sweat connections and easy-to-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified
• ETL Listed
Cabinet Features
• Heavy-gauge galvanized-steel cabinet with a louvered sound control top
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Wire fan discharge grille
• Steel louver coil guard
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for
hurricane-type winds
(Anchor bracket kits available.)
| GSX160601 | |
| Capacities | |
| Nominal Cooling (BTU/h) | 54,000 |
| SEER | 16 |
| Decibels | 73 |
| Compressor | |
| RLA | 21.4 |
| LRA | 135 |
| Condenser Fan Motor | |
| Horsepower | 1/3 |
| FLA | 2.80 |
| Refrigeration System | |
| Refrigerant Line Size ¹ | |
| Liquid Line Size (“O.D.) | ⅜" |
| Suction Line Size (“O.D.) | ⅞" |
| Refrigerant Connection Size | |
| Liquid Valve Size (“O.D.) | ⅜" |
| Suction Valve Size (“O.D.) | ⅞" |
| Valve Type | Sweat |
| Refrigerant Charge | 237 |
| Electrical Data | |
| Voltage-Phase (60 Hz) | 208/230-1 |
| Minimum Circuit Ampacity ² | 29.6 |
| Max. Overcurrent Protection ³ | 50 |
| Min / Max Volts | 197/253 |
| Electrical Conduit Size | ½" or ¾" |
| Equipment Weight (lbs) | 279 |
| Ship Weight (lbs) | 301 |
| ENERGY STAR® Certified | Yes |
Product Features
• Internal factory-installed thermal expansion valves for cooling and heat pump applications
• Direct drive, multi-speed ECM blower motor
• All-aluminum evaporator coil
• Coil mounting track for quick repositioning
• Optimized for use with R-410A refrigerant
• Cabinet air leakage less than 2.0% at 1.0 inch H₂O when tested in
accordance with ASHRAE standard 193
• Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in
accordance with ASHRAE standard 193
• AHRI certified; ETL listed
• Rigid SmartFrame™ cabinet
• Horizontal or vertical configuration capabilities
• 21” depth for easier attic access
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• Screw-less sides and back helps to reduce condensation when installed in humid locations
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Glue-less cabinet insulation retention
• Tool-less filter access
• Field Installed 3 kW – 25 kW electric heater
kits available
| ASPT61D14 | |
| Nominal Ratings | 60,000 |
| Cooling (Btu/h) | |
| Blower | |
| Diameter | 11¹⁵⁄₁₆" |
| Width | 10⅝" |
| Coil Connections | |
| Liquid | ⅜" |
| Suction | ⅞" |
| Coil Drain Connect (FPT) | ¾" |
| Electrical Data | |
| Voltage | 208/230 |
| Minimum Circuit Ampacity | 8.6 / 8.6 |
| Max. Overcurrent Device (Amps) | 15 / 15 |
| Minimum VAC | 197 |
| Maximum VAC | 253 |
| Blower Motor | |
| Full Load Amps (FLA) | 6.9 |
| Horsepower (HP) | 1 |
| Ship Weight (Lbs.) | 167 |
$4,709.00
-
