Standard Features
- Energy-efficient compressor
- Single-speed condenser fan motor
- Factory-installed filter drier
- Copper tube/aluminum fin coil
- Service valves with sweat connections and easy-access gauge ports
- Contactor with lug connection
- Ground lug connection
- AHRI Certified; ETL Listed
Cabinet Features
- Heavy-gauge galvanized-steel cabinet with a louvered sound control top
- Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
- Steel louver coil guard
- Top and side maintenance access
- Single-panel access to controls with space provided for field-installed accessories
- When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
| GSX140601 | |
| Capacities | |
| Nom Cool (BTU/h) | 60,000 |
| SEER/EER | 14 / 11.7 |
| Decibels | 75 |
| Compressor | |
| RLA | 25.0 |
| LRA | 134 |
| Condenser Fan Motor | |
| Hp | 1/4 |
| FLA | 1.3 |
Refrigeration System Refrigerant Line Size ¹ | |
| Liquid Line Size (“O.D.) | ⅜” |
| Suction Line Size (“O.D.) | 1⅛” |
| Refrigerant Connection Size | |
| Liquid Valve Size (“O.D.) | ⅜” |
| Suction Valve Size (“O.D.) ² ³ | ⅞” |
| Valve Type | Sweat |
| Charge | 120 |
| Included piston: | 0.088 |
| Electrical Data | |
| Voltage-Phase (60 Hz) | 208/230-1 |
| Minimum Circuit Ampacity ⁴ | 32.6 |
| Max. Overcurrent Protection ⁵ | 50 amps |
| Min/Max Volts | 197/253 |
| Conduit | ½” or ¾” |
| Equipment Weight | 260 |
| Shipping Weight | 280 |
Product Features
-Internal factory-installed thermal expansion
-valves for cooling and heat pump applications
-Direct drive, multi-speed ECM blower motor
-All-aluminum evaporator coil
-Coil mounting track for quick repositioning
-Optimized for use with R-410A refrigerant
-Cabinet air leakage less than 2.0%
at 1.0 inch H₂O when tested in
accordance with ASHRAE standard 193
-Cabinet air leakage less than 1.4%
at 0.5 inch H₂O when tested in
accordance with ASHRAE standard 193
-AHRI certified; ETL listed
-Tool-less filter access
-Field Installed 3 kW – 25 kW electric heater
kits available
-Rigid SmartFrame™ cabinet
-Horizontal or vertical configuration capabilities
-DecaBDE-free ther pan with secondary drain connections
moplastic drain
-21” depth for easier attic access to reduce condensation when
installed in humid locations
-Foil-faced insulation covers the internal
casing to reduce cabinet condensation
-Galvanized, leather grain-embossed finish
-Glue-less cabinet insulation retention
| ASPT61D14 | |
| Nominal Ratings | |
| Cooling (Btu/h) | 60,000 |
| Blower | |
| Diameter | 11¹⁵⁄₁₆” |
| Width | 10⅝” |
| Coil Connections | |
| Liquid | ⅜” |
| Suction | ⅞” |
| Coil Drain Connect (FPT) | ¾” |
| Electrical Data | |
| Voltage | 208/230 |
| Minimum Circuit Ampacity | 8.6 / 8.6 |
| Max. Overcurrent Device (Amps) | 15 / 15 |
| Minimum VAC | 197 |
| Maximum VAC | 253 |
| Blower Motor | |
| Full Load Amps (FLA) | 6.9 |
| Horsepower (HP) | 1 |
| Ship Weight (Lbs.) | 167 |
$3,643.00
-
