A 5 ton packaged heat pump can be used as a replacement for traditional central air systems or gas furnaces, providing both heating and cooling in a single, energy-efficient system. When in heating mode, the system extracts heat from the air or ground outside and uses it to raise the temperature inside the building. This is achieved through the use of a liquid refrigerant that absorbs heat as it evaporates and releases it as it condenses. In cooling mode, the system removes heat from the indoor air and releases it outdoors, effectively lowering the temperature inside the building. This process is reversed using a component called a reversing valve and the same liquid refrigerant used in heating mode.
Packaged heat pumps are a good choice for those who want a single system for both heating and cooling and are looking for a more sustainable and efficient solution. They are particularly effective in warmer climates and during the heating season, when temperatures are high and traditional heating systems may not be needed as frequently.
5 Ton 13.4 SEER2 Goodman Heat Pump Package Unit GPHH36041
Standard Features
• Energy-efficient scroll compressor
• Multi-speed ECM indoor blower motor
• Quiet horizontal discharge
• All-aluminum evaporator coil
• Copper tube/aluminum fin condenser coil
• Totally enclosed, permanently lubricated condenser fan motor
• Fully charged system
• Electric heat kit available as a field-installed option
• AHRI certified; ETL listed
Cabinet Features
• Heavy-gauge galvanized-steel cabinet with architectural gray powder-paint finish
• Aluminum foil-facing internal insulation reinforced with fiberglass scrim
• Fully insulated blower compartment with convenient access panels
• Meets cabinet air leakage requirements when tested in accordance with ASHRAE standard 193
• Louvered condenser coil protection
• One footprint for all tonnages
• When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
GPHH36041
| GPHH36041 | |
|---|---|
| Cooling Capacity | |
| Total BTU/h | 57,000 |
| Sensible BTU/h | 41,838 |
| SEER2/EER2 | 13.4 / 10.6 |
| AHRI Numbers | 208842409 |
| Heating Capacity | |
| BTU/h (47°F) | 54,500 |
| C.O.P. (47°F) | 3.58 |
| BTU/h (17°F) | 32,200 |
| C.O.P. (17°F) | 2.36 |
| HSPF2 | 6.70 |
| Evaporator Motor | |
| Type | ECM |
| Wheel (D x W) | 11 x 8 |
| Cooling CFM3 | 1,700 |
| Fan-Only CFM | 1,202 |
| No. of Speeds | 5 |
| Horsepower – RPM | 3/4 – 1050 |
| Evaporator Coil | |
| Face Area (ft2) | 7.01 |
| Rows Deep | 4 |
| Fins per Inch | 14 |
| Metering Device Type | Piston |
| Drain Size (NPT) | ¾” |
| Refrigerant Charge (oz.) | 173 |
| Condenser Fan | |
| Horsepower – RPM | 1/4 – 1075 |
| Fan Diameter | 22 |
| # Fan Blades | 4 |
| Condenser Coil | |
| Face Area (ft2) | 18.85 |
| Rows Deep | 2 |
| Fins per Inch | 20 |
| Metering Device Type | Piston |
| Compressor | |
| Quantity | 1 |
| Type | Scroll |
| Stage | Single |
| Sound Power dBA | 80 |
| Electrical Data | |
| Compressor RLA/LRA | 26.4 / 134 |
| Voltage/Phase (60 Hz) | 208-230 / 1 |
| Indoor Blower FLA | 5.4 |
| Outdoor Fan FLA | 1.4 |
| M.C.A.1 | 39.8 |
| M.O.P.2 | 60 |
| Operating Weight (lbs) | 400 |
| Ship Weight (lbs) | 412 |
Â
Product Documents
Product Documents
$4,710.00
-
