Standard Features
- Energy-efficient compressor
- Factory-installed filter drier
- Fully charged for 15’ of tubing length
- Copper tube/aluminum fin coil
- Service valves with sweat connections and easy-to-access gauge ports
- Contactor with lug connection
- Ground lug connection
- AHRI Certified
Cabinet Features
- Heavy-gauge galvanized-steel cabinet with a louvered sound control top
- Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
- Wire fan discharge grille
- Steel louver coil guard
- Single-panel access to controls with space provided for field-installed accessories
- When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds
- (Anchor bracket kits available.)
| GSX160481 | |
| Capacities | |
| Nominal Cooling (BTU/h) | 45,500 |
| SEER | 16 |
| Decibels | 73 |
| Compressor | |
| RLA | 17.9 |
| LRA | 112 |
| Condenser Fan Motor | |
| Horsepower | 1/4 |
| FLA | 1.30 |
Refrigeration System Refrigerant Line Size ¹ | |
| Liquid Line Size (“O.D.) | ⅜” |
| Suction Line Size (“O.D.) | ⅞” |
| Refrigerant Connection Size | |
| Liquid Valve Size (“O.D.) | ⅜” |
| Suction Valve Size (“O.D.) | ⅞” |
| Valve Type | Sweat |
| Refrigerant Charge | 121 |
| Electrical Data | |
| Voltage-Phase (60 Hz) | 208/230-1 |
| Minimum Circuit Ampacity ² | 23.7 |
| Max. Overcurrent Protection ³ | 40 |
| Min / Max Volts | 197/253 |
| Electrical Conduit Size | ½” or ¾” |
| Equipment Weight (lbs) | 219 |
| Ship Weight (lbs) | 241 |
Product Features
- Internal factory-installed thermal expansion
- valves for cooling and heat pump applications
- Direct drive, multi-speed ECM blower motor
- All-aluminum evaporator coil
- Coil mounting track for quick repositioning
- Optimized for use with R-410A refrigerant
- Cabinet air leakage less than 2.0%
- at 1.0 inch H₂O when tested in accordance with ASHRAE standard 19
- Field Installed 3 kW – 25 kW electric heater kits available
- Rigid SmartFrame™ cabinet
- Horizontal or vertical configuration capabilities
- 21” depth for easier attic access to reduce condensation when installed in humid locations
- DecaBDE-free ther pan with secondary drain connections moplastic drain
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
| ASPT49D14 | |
| Nominal Ratings | |
| Cooling (Btu/h) | 48,000 |
| Blower | |
| Diameter | 11¹⁵⁄₁₆” |
| Width | 10⅝” |
| Coil Connections | |
| Liquid | ⅜” |
| Suction | ⅞” |
| Coil Drain Connect (FPT) | ¾” |
| Electrical Data | |
| Voltage | 208/230 |
| Minimum Circuit Ampacity | 8.6 / 8.6 |
| Max. Overcurrent Device (Amps) | 15 / 15 |
| Minimum VAC | 197 |
| Maximum VAC | 253 |
| Blower Motor | |
| Full Load Amps (FLA) | 6.9 |
| Horsepower (HP) | 1 |
| Ship Weight (Lbs.) | 167 |
Free Shipping
$3,537.00
-
