Standard Features
• Energy-efficient compressor
• Single-speed condenser fan motor
• Factory-installed filter drier
• Copper tube/aluminum fin coil
• Service valves with sweat connections
and easy-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified; ETL Listed
Cabinet Features
• Heavy-gauge galvanized-steel cabinet with a louvered sound control top
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Steel louver coil guard
• Top and side maintenance access
• Single-panel access to controls with spaceprovided for field-installed accessories
• When properly anchored, meets the 2010 Florida
Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
| GSX140481 | |
Capacities
| |
| Nom Cool (BTU/h) | 48,000 |
| SEER/EER | 14 / 11.7 |
| Decibels | 74 |
| Compressor | |
| RLA | 19.9 |
| LRA | 109 |
| Condenser Fan Motor | |
| Hp | 1/4 |
| FLA | 1.3 |
Refrigeration System
| |
| Refrigerant Line Size | |
| Liquid Line Size (“O.D.) | ⅜” |
| Suction Line Size (“O.D.) | 1⅛” |
| Refrigerant Connection Size | |
| Liquid Valve Size (“O.D.) | ⅜” |
| Suction Valve Size (“O.D.) | ⅞” |
| Valve Type | Sweat |
| Charge | 101 |
| Included piston: | 0.078 |
| Electrical Data | |
| Voltage-Phase (60 Hz) | 208/230-1 |
| Minimum Circuit Ampacity | 26.2 |
| Max. Overcurrent Protection | 45 amps |
| Min/Max Volts | 197/253 |
| Conduit | ½” or ¾” |
| Equipment Weight Shipping Weight | 220 242 |
Standard Features
• Energy-efficient compressor
• Single-speed condenser fan motor
• Factory-installed filter drier
• Copper tube/aluminum fin coil
• Service valves with sweat connections
and easy-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified; ETL Listed
Cabinet Features
• Heavy-gauge galvanized-steel cabinet with a louvered sound control top
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Steel louver coil guard
• Top and side maintenance access
• Single-panel access to controls with space
provided for field-installed accessories
• When properly anchored, meets the 2010 Florida
Building Code unit integrity requirements for hurri-
cane-type winds (Anchor bracket kits available.)
| Model | Unit Dimensions | Nominal Tons | Connection | Piston Size | Ship Weight (lbs) | |||
| W | D | H | Liquid | Suction | ||||
| CAPF4860C6 | 21″ | 21⅛” | 30″ | 4-5 | ⅜” | ⅞” | 0.093 | 65 |
Standard Features
• Heavy-duty aluminized-steel dual- diameter tubular heat exchanger
• Single-stage gas valve
• Durable Hot-surface igniter
• Quiet, single-speed draft induced
• Self-diagnostic control board
• Color-coded low-voltage terminals
• Multi-speed ECM blower motor
• California Low NOx emissions models available
• Can no longer be installed in California’s South Coast Air Quality Management District (SCAQMD)
on or after October 1, 2019.
• AHRI Certified; ETL Listed
Cabinet Features
• Installation:
– GMES80-upflow, horizontal left or right
– GCES80- downflow, horizontal left or right
• Convenient left or right connection
for gas and electrical service
• Heavy-gauge steel cabinet with durable baked-enamel finish
• Foil faced insulated heat exchanger
| GMES801005C | |
| Heating Capacity | |
| Input | 100,000 |
| Natural Gas Output | 80,000 |
| LP Gas Output | 80,000 |
| AFUE ¹ | 80 |
| Available AC @ 0.5” ESP | 5 |
| Temperature Rise Range (°F) | 35-65 |
| Circulator Blower | |
| Size (D x W) | 10″ x 10″ |
| Horsepower @1075 RPM | 0.75 |
| Speed | 5 |
| Vent Diameter ² | 4″ |
| No. of Burners | 5 |
| Electrical Data | |
| Min. Circuit Ampacity ³ | 12.45 |
| Max. Overcurrent Device (amps) ⁴ | 15 |
| Ship Weight (lbs) | 132 |
$3,532.00
Out of stock
