Packaged heat pumps combine both indoor and outdoor components into a single unit, making them more compact and easier to install than split-system heat pumps, which have separate indoor and outdoor units. These systems do not require an outdoor unit and not a lot of ductwork, making them a quiet, discreet option for heating and cooling.
A 4 ton packaged heat pump can be used as an alternative to traditional central air systems or gas furnaces, providing both heating and cooling in a single, energy-efficient system. In heating mode, it extracts waste heat from the air or ground outside and transfers it inside to raise the temperature in the building using a liquid refrigerant that absorbs and releases heat as it evaporates and condenses. In cooling mode, the system draws heat from the indoor air and releases it outdoors to effectively lower the temperature in the building, using the same refrigerant and a reversing valve to reverse the process.
Packaged heat pumps are a good choice for those who want a single system for both heating and cooling and are looking for a more sustainable and efficient solution, particularly in warmer climates and during the heating season when traditional heating systems may not be needed as frequently.
4 Ton 13.4 SEER2 Goodman Heat Pump Package Unit GPHH34841
Standard Features
• Energy-efficient scroll compressor
• Multi-speed ECM indoor blower motor
• Quiet horizontal discharge
• All-aluminum evaporator coil
• Copper tube/aluminum fin condenser coil
• Totally enclosed, permanently lubricated condenser fan motor
• Fully charged system
• Electric heat kit available as a field-installed option
• AHRI certified; ETL listed
Cabinet Features
• Heavy-gauge galvanized-steel cabinet with architectural gray powder-paint finish
• Aluminum foil-facing internal insulation reinforced with fiberglass scrim
• Fully insulated blower compartment with convenient access panels
• Meets cabinet air leakage requirements when tested in accordance with ASHRAE standard 193
• Louvered condenser coil protection
• One footprint for all tonnages
• When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
GPHH34841
| Model | GPHH34841 |
|---|---|
| Cooling Capacity | |
| Total BTU/h | 46,000 |
| Sensible BTU/h | 36,616 |
| SEER2/EER2 | 13.4 / 10.6 |
| AHRI Numbers | 208842408 |
| Heating Capacity | |
| BTU/h (47°F) | 43,500 |
| C.O.P. (47°F) | 3.62 |
| BTU/h (17°F) | 24,800 |
| C.O.P. (17°F) | 2.24 |
| HSPF2 | 6.70 |
| Evaporator Motor | |
| Type | ECM |
| Wheel (D x W) | 10 x 8 |
| Cooling CFM3 | 1,570 |
| Fan-Only CFM | 1,094 |
| No. of Speeds | 5 |
| Horsepower – RPM | 3/4 – 1050 |
| Evaporator Coil | |
| Face Area (ft2) | 6.23 |
| Rows Deep | 4 |
| Fins per Inch | 14 |
| Metering Device Type | Piston |
| Drain Size (NPT) | ¾” |
| Refrigerant Charge (oz.) | 170 |
| Condenser Fan | |
| Horsepower – RPM | 1/4 – 1075 |
| Fan Diameter | 22 |
| # Fan Blades | 4 |
| Condenser Coil | |
| Face Area (ft2) | 17.02 |
| Rows Deep | 2 |
| Fins per Inch | 16 |
| Metering Device Type | Piston |
| Compressor | |
| Quantity | 1 |
| Type | Scroll |
| Stage | Single |
| Sound Power dBA | 80 |
| Electrical Data | |
| Compressor RLA/LRA | 19.9 / 109 |
| Voltage/Phase (60 Hz) | 208-230 / 1 |
| Indoor Blower FLA | 5.4 |
| Outdoor Fan FLA | 1.4 |
| M.C.A.1 | 31.7 |
| M.O.P.2 | 50 |
| Operating Weight (lbs) | 375 |
| Ship Weight (lbs) | 387 |
Â
Product Documents
Product Documents
$4,441.00
-
