(This Product Is Discontinued)
This system is being phased out. Follow the link below to the new SEER2 model.
Install Kit Includes:
50′ Copper Insulated Line Set
Drain Float Switch
6′ Electrical Whip
60 amp non fused disconnect
Plastic Condenser Pad
Digital Thermostat
Heat Strip up to 10 kw
Standard Features:
• Energy-efficient compressor
• Single-speed condenser fan motor
• Factory-installed filter drier
• Copper tube/aluminum fin coil
• Service valves with sweat connections and easy-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified; ETL Listed
Cabinet Features:
• Heavy-gauge galvanized-steel cabinet with a louvered sound control top
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Steel louver coil guard
• Top and side maintenance access
• Single-panel access to controls with spaceprovided for field-installed accessories
• When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurri-cane-type winds (Anchor bracket kits available.)
| GSX140361 | |
| Capacities Nom Cool (BTU/h) SEER/EER Decibels | 36,000 14 / 12 73 |
| Compressor RLA LRA | 14.1 77 |
| Condenser Fan Motor Hp FLA | 1/6 0.95 |
| Refrigeration System Refrigerant Line Size ¹ Liquid Line Size (“O.D.) Suction Line Size (“O.D.) Refrigerant Connection Size Liquid Valve Size (“O.D.) Suction Valve Size (“O.D.) ² ³ Valve Type Charge Included piston: | ⅜” ⅞” ⅜” ¾”Sweat81 0.068 |
| Electrical Data Voltage-Phase (60 Hz) Minimum Circuit Ampacity ⁴ Max. Overcurrent Protection ⁵ Min/Max Volts Conduit | 208/230-1 18.6 30 amps 197/253 ½” or ¾” |
| Equipment Weight Shipping Weight | 162 180 |
Product Features
• Check flowrator for cooling and heat pump applications
• Direct drive, multi-speed PSC blower motor
• All-aluminum evaporator coil
• Coil mounting track for quick repositioning
• Cabinet air leakage less than 2.0% at 1.0 inch H?O when tested in accordance with ASHRAE standard 193
• Cabinet air leakage less than 1.4% at 0.5 inch H?O when tested in accordance with ASHRAE standard 193
• AHRI certified; ETL listed
• Rigid SmartFrame? cabinet
• Horizontal or vertical configuration capabilities
• 21″ depth for easier attic access
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• Screw-less sides and back helps to reduce condensation when installed in humid locations
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Glue-less cabinet insulation retention
• Tool-less filter access
• Field Installed 3 kW – 25 kW electric heater kits available
| ARUF37C14 | |
| Nominal Ratings | |
| Cooling (Btu/h) | 36,000 |
| Piston Size | 0.072 |
| Blower | |
| Diameter | 10⅝” |
| Width | 8″ |
| Coil Connections | |
| Liquid | ⅜” |
| Suction | ⅞” |
| Coil Drain Connect (FPT) | ¾” |
| Electrical Data | |
| Voltage | 208/230 |
| Min Circuit Ampacity | 3.6/3.6 |
| Max. Overcurrent Device (Amps) | 15/15 |
| Minimum VAC | 197 |
| Maximum VAC | 253 |
| Blower Motor | |
| Full Load Amps (FLA) | 2.85 |
| Horsepower (HP) | ⅓ |
| Ship Weight (Lbs.) | 130 |
$3,061.00
-
