(This Product Is Discontinued)
This system is being phased out. Follow the link below to the new SEER2 model.
Standard Features
• Energy-efficient compressor
• Single-speed condenser fan motor
• Factory-installed filter drier
• Copper tube/aluminum fin coil
• Service valves with sweat connections
and easy-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified; ETL Listed
Cabinet Features
• Heavy-gauge galvanized-steel cabinet with a louvered sound control top
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Steel louver coil guard
• Top and side maintenance access
• Single-panel access to controls with space
provided for field-installed accessories
• When properly anchored, meets the 2010 Florida
Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
| GSX140361 | |
| Capacities Max Cooling (BTU/h) | 36,000 |
| SEER/EER | 14 / 12 |
| Decibels | 73 |
| Compressor | |
| RLA | 14.1 |
| LRA | 77 |
| Condenser Fan Motor | |
| Hp | 1/6 |
| FLA | 0.95 |
Refrigeration System Refrigerant Line Size ¹
| |
| Liquid Line Size (“O.D.) | ⅜” |
| Suction Line Size (“O.D.) | ⅞” |
| Refrigerant Connection Size Liquid Valve Size (“O.D.) | ⅜” |
| Suction Valve Size (“O.D.) ² ³ | ¾” |
| Valve Type | Sweat |
| Charge | 81 |
| Included piston: | 0.068 |
| Electrical Data | |
| Voltage-Phase (60 Hz) | 208/230-1 |
| Minimum Circuit Ampacity ⁴ | 18.6 |
| Max. Overcurrent Protection | 30 amps |
| Min/Max Volts | 197/253 |
| Conduit | ½” or ¾” |
| Equipment Weight Shipping Weight | 162 180 |
Product Features
• Check flowrator for cooling and heat pump applications
• Direct drive, multi-speed PSC blower motor
• All-aluminum evaporator coil
• Coil mounting track for quick repositioning
• Cabinet air leakage less than 2.0% at
1.0 inch H₂O when tested in accordance with ASHRAE standard 193
• Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in
accordance with ASHRAE standard 193
• AHRI certified; ETL listed
• Rigid SmartFrame™ cabinet
• Horizontal or vertical configuration capabilities
• 21″ depth for easier attic access
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• Screw-less sides and back helps to reduce condensation when installed in humid locations
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Glue-less cabinet insulation retention
• Tool-less filter access
• Field Installed 3 kW – 25 kW electric heater kits available
| ARUF37C14 | |
| Nominal Ratings | |
| Cooling (Btu/h) | 36,000 |
| Piston Size | 0.072 |
| Blower | |
| Diameter | 10⅝” |
| Width | 8″ |
| Coil Connections | |
| Liquid | ⅜” |
| Suction | ⅞” |
| Coil Drain Connect (FPT) | ¾” |
| Electrical Data | |
| Voltage | 208/230 |
| Min Circuit Ampacity | 3.6/3.6 |
| Max. Overcurrent Device (Amps) | 15/15 |
| Minimum VAC | 197 |
| Maximum VAC | 253 |
| Blower Motor | |
| Full Load Amps (FLA) | 2.85 |
| Horsepower (HP) | ⅓ |
| Ship Weight (Lbs.) | 130 |
$2,478.00
-
