Standard Features
• Energy-Efficient Compressor
• Copper tube/ enhanced aluminum fin coil-5mm diameter on 1.5-4.0T
• Factory-installed filter drier
• Fully charged for 15’ of tubing length
• Service valves with sweat connections and easy-to-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified
• ETL Listed
Cabinet Features
• Removable grille-style top design compliant with UL 60335-2-40
• Heavy-gauge galvanized-steel cabinet
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Steel louver coil guard
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
Standard Features
• Heavy-duty aluminized-steel tubular heat exchanger
• Stainless-steel secondary heat exchanger
• Single-stage gas valve
• Durable Silicon Nitride igniter
• Quiet single-speed induced draft blower
• Self-diagnostic control board with constant memory fault code history output to a LED
• All models comply with California 40 ng/J Low NOx emissions standard
• Can no longer be installed in California’s South Coast Air Quality Management District (SCAQMD) on or after October 1, 2019.
• AHRI Certified; ETL Listed
Cabinet Features
• Designed for multi-position installation —
GM9S96: upflow, horizontal left or right
• Certified for direct vent (2-pipe) or non-direct vent (1-pipe)
• Easy-to-install top venting with optional side venting — GM9S96/upflow models only
• Convenient left or right connection for gas and electrical service
• Cabinet air leakage (QLeak) ≤ 2%
• Heavy-gauge steel cabinet with durable finish
• Fully insulated heat exchanger and blower section
• Airtight solid bottom or side return with easy-cut tabs for effortless removal in bottom air-inlet applications
Standard Features
• All-Aluminum evaporator coil
• Optimized for use with R-410A refrigerant
• Some models suitable for use with R-410A or R-22 refrigerant
• CAPT models feature factory-installed thermal expansion valves for cool- ing and heat pump applications
• Check flowrator for cooling and heat pump applications
• Vertical and horizontal models available
• 21″ depth for easier attic access
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Rust resistant, thermoplastic drain pans featuring a low water-retention design
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• UV-resistant drain pan
• AHRI certified; ETL listed
| GM9S960803BN | GSXN402410 | CAPFA2422B6 | |||||
| Heating Capacity | Capacities | Unit Dimensions | |||||
| Input | 80000 | Nominal Cooling (BTU/h) | 24,000 | W | 17½” | ||
| Natural Gas Output | 76880 | Decibels (dBA) | 72 | D | 21″ | ||
| Compressor | H | 22″ | |||||
| AFUE ¹ | 96 | RLA | 8.4 | A | 18″ | ||
| Available AC @ 0.5” ESP | 1.5-3 | LRA | 41.2 | Nominal Tons | 2 | ||
| Temperature Rise Range (°F) | 35-65 | Stage | Single | Connection | |||
| Circulator Blower | Type | Rotary | Liquid | ⅜” | |||
| Size (D x W) | 11″ x 8″ | Condenser Fan Motor | Suction | ¾” | |||
| Horsepower @1075 RPM | ½ | Motor Type | PSC | Piston Size | 0.059 | ||
| Speed | 9 | Horsepower | ⅛ | Ship Weight (lbs) | 45 | ||
| Vent Diameter ² | 2″ – 3″ | FLA | 0.7 | ||||
| No. of Burners | 4 | Refrigeration System | |||||
| Electrical Data | Refrigerant Line Size | ||||||
| Min. Circuit Ampacity | 10.3 | Liquid Line Size (“O.D.) | ⅜” | ||||
| Max. Overcurrent Device (amps) | 15 | Suction Line Size (“O.D.) | ¾” | ||||
| Ship Weight (lbs) | 118 | Refrigerant Connection Size | |||||
| Liquid Valve Size (“O.D.) | ⅜” | ||||||
| Suction Valve Size (“O.D.) | ¾” | ||||||
| Valve Type | Sweat | ||||||
| Refrigerant Charge | 71 | ||||||
| Electrical Data | |||||||
| Voltage-Phase (60 Hz) | 208/230-1 | ||||||
| Minimum Circuit Ampacity | 11.2 | ||||||
| Max. Overcurrent Protection | 15 | ||||||
| Min / Max Volts | 197/253 | ||||||
| Electrical Conduit Size | ½” or ¾” | ||||||
| Equipment Weight (lbs) | 138 | ||||||
| Ship Weight (lbs) | 153 | ||||||
$3,793.00
Out of stock
