(This Product Is Discontinued)
This system is being phased out. Follow the link below to the new SEER2 model.
Install Kit Includes:
* 50′ Copper Insulated Line Set
* Drain Float Switch
* 6′ Electrical Whip
* 60 amp non fused disconnect
* Plastic Condenser Pad
* Digital Thermostat
* Heat Strip up to 10 kw
Standard Features
• Energy-efficient compressor
• Single-speed condenser fan motor
• Factory-installed filter drier
• Copper tube/aluminum fin coil
• Service valves with sweat connections and easy-access gauge ports
• Contactor with lug connection
• Ground lug connection
• AHRI Certified; ETL Listed
Cabinet Features
• Heavy-gauge galvanized-steel cabinet with a louvered sound control top
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Steel louver coil guard
• Top and side maintenance access
• Single-panel access to controls with space provided for field-installed accessories
• When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane- type winds (Anchor bracket kits available.)
GSX140301
- Capacities 30,000
- Max Cooling (BTU/h)
- SEER/EER 14 / 12.0
- Decibels 74
- Compressor
- RLA 12.8
- LRA 64
- Condenser Fan Motor 1/6
- Hp
- FLA 0.95
- Refrigeration System
- Refrigerant Line Size ¹
- Liquid Line Size (“O.D.) ⅜”
- Suction Line Size (“O.D.) ¾”
- Refrigerant Connection Size
- Liquid Valve Size (“O.D.) ⅜”
- Suction Valve Size (“O.D.) ¾”
- Valve Type Sweat
- Charge 80
- Included piston: 0.065
- Electrical Data 208/230-1
- Voltage-Phase (60 Hz)
- Minimum Circuit Ampacity ⁴ 17
- Max. Overcurrent Protection ⁵ 25 amps
- Min/Max Volts 197/253
- Conduit ½” or ¾”
- Equipment Weight 162
- Shipping Weight 180
Product Features
• Check flowrator for cooling and heat pump applications
• Direct drive, multi-speed PSC blower motor
• All-aluminum evaporator coil
• Coil mounting track for quick repositioning
• Cabinet air leakage less than 2.0% at 1.0 inch H₂O when tested in accordance with ASHRAE standard 193
• Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in accordance with ASHRAE standard 193
• AHRI certified; ETL listed
• Rigid SmartFrame™ cabinet
• Horizontal or vertical configuration capabilities
• 21″ depth for easier attic access
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• Screw-less sides and back helps to reduce condensation when installed in humid locations
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Glue-less cabinet insulation retention
• Tool-less filter access
• Field Installed 3 kW – 25 kW electric heater kits available
ARUF31B14
- Nominal Ratings
- Cooling (Btu/h) 30,000
- Piston Size 0.065
- Blower
- Diameter 9½”
- Width 6″
- Coil Connections
- Liquid ⅜”
- Suction ⅞”
- Coil Drain Connect (FPT) ¾”
- Electrical Data
- Voltage 208/230
- Min Circuit Ampacity 2.2/2.2
- Max. Overcurrent Device (Amps) 15/15
- Minimum VAC 197
- Maximum VAC 253
- Blower Motor
- Full Load Amps (FLA) 1.75
- Horsepower (HP) ⅓
- Ship Weight (Lbs.) 110
Product Documents
$2,245.00
-
