2.5 Ton 13.4 SEER2 Goodman Heat Pump Package Unit GPHH33041
A packaged heat pump with a capacity of 2.5 tons can effectively and sustainably regulate the temperature in your home or commercial space. These units combine the indoor and outdoor components of a traditional split-system heat pump into a single, compact design, making them simpler to install and eliminating the need for external fans or ductwork.
In heating mode, the heat pump absorbs heat from the outside air or ground using a refrigerant, which it then releases inside to increase the temperature. In cooling mode, the heat pump uses the same refrigerant and a component called a reversing valve to draw heat from the indoor air and release it outside, lowering the temperature inside.
Packaged heat pumps, such as a 2.5 ton unit, can serve as a good alternative to central air systems or gas furnaces, especially for those seeking a single, energy-efficient system for both heating and cooling. These heat pumps offer the convenience and energy-saving benefits of a packaged system, particularly in warmer climates and during the heating season when traditional heating systems may not be needed as frequently. They are also a quietly operating solution for your heating and cooling needs.
Standard Features
• Energy-efficient scroll compressor
• Multi-speed ECM indoor blower motor
• Quiet horizontal discharge
• All-aluminum evaporator coil
• Copper tube/aluminum fin condenser coil
• Totally enclosed, permanently lubricated condenser fan motor
• Fully charged system
• Electric heat kit available as a field-installed option
• AHRI certified; ETL listed
Cabinet Features
• Heavy-gauge galvanized-steel cabinet with architectural gray powder-paint finish
• Aluminum foil-facing internal insulation reinforced with fiberglass scrim
• Fully insulated blower compartment with convenient access panels
• Meets cabinet air leakage requirements when tested in accordance with ASHRAE standard 193
• Louvered condenser coil protection
• One footprint for all tonnages
• When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
GPHH33041
| Models | GPHH33041 |
|---|---|
| Cooling Capacity | |
| Total BTU/h | 27,800 |
| Sensible BTU/h | 21,934 |
| SEER2/EER2 | 13.4 / 10.6 |
| AHRI Numbers | 208842405 |
| Heating Capacity | |
| BTU/h (47°F) | 27,600 |
| C.O.P. (47°F) | 3.54 |
| BTU/h (17°F) | 15,400 |
| C.O.P. (17°F) | 2.38 |
| HSPF2 | 6.70 |
| Evaporator Motor | |
| Type | ECM |
| Wheel (D x W) | 10 x 8 |
| Cooling CFM3 | 1,050 |
| Fan-Only CFM | 581 |
| No. of Speeds | 5 |
| Horsepower – RPM | 1/2 – 1050 |
| Evaporator Coil | |
| Face Area (ft2) | 5.26 |
| Rows Deep | 3 |
| Fins per Inch | 14 |
| Metering Device Type | Piston |
| Drain Size (NPT) | ¾” |
| Refrigerant Charge (oz.) | 105 |
| Condenser Fan | |
| Horsepower – RPM | 1/6 – 810 |
| Fan Diameter | 22 |
| # Fan Blades | 3 |
| Condenser Coil | |
| Face Area (ft2) | 13.37 |
| Rows Deep | 1 |
| Fins per Inch | 24 |
| Metering Device Type | Piston |
| Compressor | |
| Quantity | 1 |
| Type | Scroll |
| Stage | Single |
| Sound Power dBA | 76 |
| Electrical Data | |
| Compressor RLA/LRA | 14.1 / 73 |
| Voltage/Phase (60 Hz) | 208-230 / 1 |
| Indoor Blower FLA | 3.8 |
| Outdoor Fan FLA | 0.95 |
| M.C.A.1 | 22.4 |
| M.O.P.2 | 35 |
| Operating Weight (lbs) | 315 |
| Ship Weight (lbs) | 324 |
Product Documents
Product Documents
$3,459.00
-
