Heaters, Curbs, and Fresh Air Dampers are sold separately for this system. Please call for pricing.
Call us at (888) 944-8684 or message us to specify the heat strip needed or if other accessories are needed.
Standard Features
- R-410A chlorine-freerefrigerant
- High-efficiency scrollcompressors
- Two-stage cooling
- Copper tube / aluminum fin coils(7½ – 10 Ton)
- Micro-Channel indoor & outdoor coils (12½ Ton)
- Power block for field wiring
- High- and low-pressure switches
- High-capacity, steel-cased filterdrier
- Heater kits with single-point entry
- 24-volt terminalstrip
- Units meet the performance outlined in Table 6.8.1-1 of ASHRAE Standard 90.1-2013
- AHRI Certified; ETL Listed
Cabinet Features
- Heavy-gauge, galvanized- steel cabinet with UV-resistant powder-paint finish
- Built-in filter rack with standard 2” filters
- Convertible airflow orientation
- Easy to service
- Full perimeter rail
- Sloped drain pan
| DCC150 ***3V***B* | |
| Cooling Capacity | |
| Total, BTU/h | 146,000 |
| Sensible BTU/h | 97,000 |
| EER / IEER | 11.0 / 12.6 |
| Decibels | 83 |
| ARI Reference #s | 10567462 |
| Evaporator Motor / Coil | |
| Motor Type | 2-speed Belt Drive |
| Indoor Nominal CFM | 3,900 |
| Indoor Motor FLA (Cooling) | 9.1 |
| Horsepower – RPM | 3.0/1760-1165 |
| Piston Size (Cooling) | 0.094 |
| Filter Size | (4) 20″ x 20″ x 2″ (2) 20″ x 14″ x 2″ |
| Drain Size (NPT) | ¾” |
| R-410A Refrigerant Charge Cir #1 & #2 | 130 oz |
| Evaporator Coil Face Area (ft2) | 12.3 |
| Micro-Channel Fins per Inch | 15 |
| Condenser Fan / Coil | |
| Quantity of condenser Fan Motors | 2 |
| Horsepower – RPM | ⅓ – 1,075 |
| Fan Diameter / # Fan Blades | 22/3 |
| Outdoor Nominal CFM | 8,400 |
| Face Area (ft2) | 38.4 |
| Micro-Channel Fins per Inch | 23 |
| Belt Drive Evap Fan Data | |
| # of Wheels (D x W) | (1) 15″ x 15″ |
| Motor Sheave / Blower Sheave | VP44 / AK79 |
| Belt | AX49 |
| Compressor Quantity / Type / Stage Compressor RLA / LRA ea. | 2 / Scroll / 1 22.4 / 149 |
| Electrical Data / Static | |
| Voltage / Phase / Frequency | 208/230-3-60 |
| Standard Motor Max. External Static | 1.4″ |
| Outdoor Fan FLA ea. | 2.3 |
| Min. Circuit Ampacity1 | 63.6 / 63.6 |
| Max. Overcurrent Protection (amps)2 | 80 / 80 |
| Entrance Power Supply | Locating |
| Entrance Control Voltage | Dimple |
| Operating Weight (lbs) | 1175 |
| Ship Weight (lbs) | 1200 |
Free Shipping
$9,190.00
Out of stock
