2 Ton 16 SEER Goodman HEAT PUMP Split System GSZ160241 & ASPT29B14 Install Kit 30' Line Set

$2,480.00
(No reviews yet) Write a Review
SKU:
GSZ160241+ASPT29B14+HKSX05XC-IN 30
UPC:
Does not apply

This system comes with Free Heat Strips up to 10 kw Heat W/O Breaker for Free!!

Call us at (1-762-435-4822) or message us to specify the heat strip needed or if other accessories are needed.


Install Kit Includes:

* 30' Copper Insulated Line Set
* Drain Float Switch
* 6' Electrical Whip
* 60 amp non fused disconnect
* Plastic Condenser Pad 
* Digital Thermostat
* Heat Strip up to 10 kw

Standard Features

  • High-efficiency scroll compressor
  • SmartShift® technology to  ensure quiet reliable defrost
  • Single-speed ECM condenser fan motor
  • Factory-installed bi-flow liquid-line filter drier
  • Factory-installed suction-line accumulator
  • Factory-installed compressor crankcase heater
  • Factory-installed high-capacity muffler
  • High- and low-pressure switches
  • Service valves with sweat connections and easy access to gauge ports
  • Copper tube/enhanced aluminum fin coil
  • Fully charged for 15’ of tubing length
  • Contactor with lug connection
  • Ground lug connection
  • AHRI Certified; ETL Listed

 

Cabinet Features

  • Goodman® brand sound control top design
  • Steel louver coil guard
  • Heavy-gauge galvanized-steel cabinet
  • Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
  • Top and side maintenance access
  • Service ports and controls are  accessible while unit is operating
  • When properly anchored, meets the 2010  Florida Building Code unit integrity  requirements for hurricane-type winds 

 

 

GSZ160241B

Nominal Capacities

 

Cooling (BTU/h)

24,000

Heating (BTU/h)

24,000

Decibels

75

Compressor

 

RLA

10.9

LRA

62.9

Type

Scroll

Condenser Fan Motor

 

Horsepower

1/6

FLA

1.1

Refrigeration System

Refrigerant Line Size¹

 

Liquid Line Size (“O.D.)

3/8"

Suction Line Size (“O.D.)

3/4"

Refrigerant Connection Size

 

Liquid Valve Size (“O.D.)

3/8"

Suction Valve Size (“O.D.)

3/4"

Valve Connection Type

Sweat

Refrigerant Charge (oz.)

150

Electrical Data

 

Volts/Phase (60 Hz)

208/230

Minimum Circuit Ampacity ²

14.7

Max. Overcurrent Protection ³

25

Min / Max Volts

197/253

Electrical Conduit Size

1/2" or 3/4"

Unit Weights

 

Equipment Weight

180

Shipping Weight

200

 

Product Features

  • Internal factory-installed thermal expansion                  
  • valves for cooling and heat pump applications              
  • Direct drive, multi-speed ECM blower motor                  
  • All-aluminum evaporator coil                                             
  • Coil mounting track for quick repositioning                       
  • Optimized for use with R-410A refrigerant                       
  • Cabinet air leakage less than 2.0%                                      
  • at 1.0 inch H₂O when tested in accordance with ASHRAE standard 19                                            
  • Field Installed 3 kW – 25 kW electric heater kits available
  •  Rigid SmartFrame™ cabinet
  • Horizontal or vertical  configuration capabilities
  •  21” depth for easier attic access to reduce condensation when  installed in humid locations
  •  DecaBDE-free ther  pan with secondary drain connections moplastic drain
  •  Foil-faced insulation covers the internal casing to reduce cabinet condensation

 

ASPT29B14

Nominal Ratings

 

Cooling (Btu/h)

 24,000

Blower

 

Diameter

 9½"

Width

6"

Coil Connections

 

Liquid

 ⅜"

Suction

⅞"

Coil Drain Connect (FPT)

¾"

Electrical Data

 

Voltage

 208/230

Minimum Circuit Ampacity

5.8 / 5.8

Max. Overcurrent Device (Amps)

15 / 15

Minimum VAC

197

Maximum VAC

253

Blower Motor

 

Full Load Amps (FLA)

 4.6

Horsepower (HP)

¾

Ship Weight (Lbs.)

129