2.5 Ton 16 SEER Goodman HEAT PUMP Split System GSZ160301 & ASPT37C14 Install Kit 30' Line Set

$2,583.00
(No reviews yet) Write a Review
SKU:
GSZ160301+ASPT37C14+HKSX05XC-IN 30
UPC:
Does not apply


2.5 Ton 16 SEER Goodman HEAT PUMP Split System GSZ160301 & ASPT37C14 Install Kit

This system comes with Free Heat Strips up to 10 kw Heat W/O Breaker for Free!!

Call us at (1-762-435-4822) or message us to specify the heat strip needed or if other accessories are needed.

Install Kit Includes:

* 30' Copper Insulated Line Set
* Drain Float Switch
* 6' Electrical Whip
* 60 amp non fused disconnect
* Plastic Condenser Pad 
* Digital Thermostat
* Heat Strip up to 10 kw



The best heat pump is the kind you don’t have to think or worry about. It comes on the moment you need it and then runs quietly and efficiently all year long as needed. The Goodman GSZ16 is loaded with features designed to provide outstanding performance for years to come. We use advanced techniques and materials so you know the cozy, even temperature you feel in every corner of your home is an energy-efficient trend that’s designed to stay for many years.

 

Standard Features

  • High-efficiency scroll compressor
  • SmartShift® technology to       ensure quiet reliable defrost
  • Single-speed ECM condenser fan motor
  • Factory-installed bi-flow liquid-line filter drier
  • Factory-installed suction-line accumulator
  • Factory-installed compressor crankcase heater
  • Factory-installed high-capacity muffler
  • High- and low-pressure switches
  • Service valves with sweat connections and easy access to gauge ports
  • Copper tube/enhanced aluminum fin coil
  • Fully charged for 15’ of tubing length
  • Contactor with lug connection
  • Ground lug connection
  • AHRI Certified; ETL Listed

 

Cabinet Features

  • Goodman® brand sound control top design
  • Steel louver coil guard
  • Heavy-gauge galvanized-steel cabinet
  • Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
  • Top and side maintenance access
  • Service ports and controls are accessible while unit is operating
  • When properly anchored, meets the 2010 Florida Building Code unit integrity       requirements for hurricane-type winds

 

 

GSZ160301B

Nominal Capacities

 

Cooling (BTU/h)

30,000

Heating (BTU/h)

30,000

Decibels

75

Compressor

 

RLA

13.4

LRA

72.5

Type

Scroll

Condenser Fan Motor

 

Horsepower

1/6

FLA

1.1

Refrigeration System

Refrigerant Line Size¹

 

Liquid Line Size (“O.D.)

3/8"

Suction Line Size (“O.D.)

3/4"

Refrigerant Connection Size

 

Liquid Valve Size (“O.D.)

3/8"

Suction Valve Size (“O.D.)

7/8”

Valve Connection Type

Sweat

Refrigerant Charge (oz.)

160

Electrical Data

 

Volts/Phase (60 Hz)

208/230

Minimum Circuit Ampacity ²

18.0

Max. Overcurrent Protection ³

30

Min / Max Volts

197/253

Electrical Conduit Size

1/2" or 3/4"

Unit Weights

 

Equipment Weight

186

Shipping Weight

206

 

Product Features

-Internal factory-installed thermal expansion                   - Rigid SmartFrame™ cabinet

valves for cooling and heat pump applications                   - Horizontal or vertical configuration capabilities

-Direct drive, multi-speed ECM blower motor                     -21” depth for easier attic access

-Coil mounting track for quick repositioning                       - DecaBDE-free thermoplastic drain  

-Optimized for use with R-410A refrigerant                          pan with secondary drain connection 

-Cabinet air leakage less than 2.0%                                  - Screw-less sides and back helps 

at 1.0 inch H₂O when tested in                                          to reduce condensation when 

accordance with ASHRAE standard 193                               installed in humid locations

 -Cabinet air leakage less than 1.4%                                  - Foil-faced insulation covers the internal

at 0.5 inch H₂O when tested in                                           casing to reduce cabinet condensation

accordance with ASHRAE standard 193                               -Galvanized, leather grain-embossed finish 

-AHRI certified; ETL listed                                                  -Glue-less cabinet insulation retention

-Tool-less filter access

-Field Installed 3 kW – 25 kW electric heater  

kits available

 

 

ASPT37C14

Nominal Ratings

 

Cooling (Btu/h)

 36,000

Blower

 

Diameter

 10⅝"

Width

8"

Coil Connections

 

Liquid

 ⅜"

Suction

⅞"

Coil Drain Connect (FPT)

¾"

Electrical Data

 

Voltage

 208/230

Minimum Circuit Ampacity

5.6 / 5.6

Max. Overcurrent Device (Amps)

15 / 15

Minimum VAC

197

Maximum VAC

253

Blower Motor

 

Full Load Amps (FLA)

 4.5

Horsepower (HP)

¾

Ship Weight (Lbs.)

144