1.5 Ton 16 SEER Goodman A/C Straight Cool System GSX160181 & ASPT25B14 R410a

$1,920.00
(No reviews yet) Write a Review
SKU:
GSX160181+ASPT25B14+HKSX05XC
UPC:
Does not apply

1.5 Ton 16 SEER Goodman A/C Straight Cool System GSX160181 & ASPT25B14 R410a

1.5 Ton 16 SEER Goodman A/C Straight Cool System GSX160181 & ASPT25B14 R410a

Standard Features

  • Energy-efficient compressor
  • Factory-installed filter drier
  • Fully charged for 15’ of tubing length
  • Copper tube/aluminum fin coil
  • Service valves with sweat connections  and easy-to-access gauge ports
  • Contactor with lug connection
  • Ground lug connection
  • AHRI Certified

Cabinet Features

  • Heavy-gauge galvanized-steel cabinet  with a louvered sound control top
  • Attractive Architectural Gray powder-paint  finish  with 500-hour salt-spray approval
  • Wire fan discharge grille
  • Steel louver coil guard
  • Single-panel access to controls with space  provided for field-installed accessories
  • When properly anchored, meets the 2010 Florida Building  Code unit integrity requirements for hurricane-type winds 

 

 

GSX160181

Capacities

 

Nominal Cooling (BTU/h)

18,000

SEER

16

Decibels

71.5

Compressor

 

RLA

9.0

LRA

46

Condenser Fan Motor

 

Horsepower

1/6

FLA

0.95

Refrigeration System

Refrigerant Line Size ¹

 

Liquid Line Size (“O.D.)

⅜"

Suction Line Size (“O.D.)

¾"

Refrigerant Connection Size

 

Liquid Valve Size (“O.D.)

⅜"

Suction Valve Size (“O.D.)

¾"

Valve Type

Sweat

Refrigerant Charge

78

Electrical Data

 

Voltage-Phase (60 Hz)

208/230-1

Minimum Circuit Ampacity ²

12.2

Max. Overcurrent Protection ³

20

Min / Max Volts

197/253

Electrical Conduit Size

½" or ¾"

Equipment Weight (lbs)

145

Ship Weight (lbs)

163

Product Features

  • Internal factory-installed thermal expansion                  
  • valves for cooling and heat pump applications              
  • Direct drive, multi-speed ECM blower motor                  
  • All-aluminum evaporator coil                                             
  • Coil mounting track for quick repositioning                       
  • Optimized for use with R-410A refrigerant                       
  • Cabinet air leakage less than 2.0%                                      
  • at 1.0 inch H₂O when tested in accordance with ASHRAE standard 19                                            
  • Field Installed 3 kW – 25 kW electric heater kits available
  •  Rigid SmartFrame™ cabinet
  • Horizontal or vertical  configuration capabilities
  •  21” depth for easier attic access to reduce condensation when  installed in humid locations
  •  DecaBDE-free ther  pan with secondary drain connections moplastic drain
  •  Foil-faced insulation covers the internal casing to reduce cabinet condensation

 

ASPT25B14

Nominal Ratings

 

Cooling (Btu/h)

24,000

Blower

 

Diameter

9½"

Width

6"

Coil Connections

 

Liquid

⅜"

Suction

¾"

Coil Drain Connect (FPT)

¾"

Electrical Data

 

Voltage

208/230

Minimum Circuit Ampacity

5.8 / 5.8

Max. Overcurrent Device (Amps)

15 / 15

Minimum VAC

197

Maximum VAC

253

Blower Motor

 

Full Load Amps (FLA)

4.6

Horsepower (HP)

¾

Ship Weight (Lbs.)

116


About US Shipping Price Match Returns

HVAC Warehouse is located in Tampa, FL. A third generation, family owned and operated business that has been providing quality HVAC service to its customers for over 30 years. At HVAC Warehouse we have one goal in mind, to provide your family with the best comfort solutions that suit not only their lifestyle, but also your budget. Excellent service both before and after the sale, we are here to assist in any way we can. Please call us at (1-762-4FL-HVAC (1-762 435-4822) to allow us to answer any questions you have regarding the purchase of your new Product or to assist in finding a local installer.

SHIPPING INSTRUCTIONS

To ensure a proper on-time delivery, please follow the below instructions:

Shipments will only be sent to the address listed on the eBay order. If you have provided an incorrect address, call us immediately at    (1-762-435-4822 (1-762-4FLHVAC).

If the item has already shipped, you will be responsible for the rerouting, storage, or return of the item.

Please provide a valid phone number for your order. This is required by the shipping firms so that the drivers can contact you upon arrival. We are unable to ship the product without this contact information.

Once all the information has been received and the product has shipped, you will receive a tracking number.

Although it is unlikely, in some instances damages may occur during the shipping process. To ensure you are protected, inspect the items very closely upon receipt.

NOTE: Do not personally sign or have another person sign for the item if you have not inspected and approved the receipt. Once you sign, you have accepted that product As Is, and the trucking company is no longer liable. The units are checked prior to shipping and are all in Brand New condition. If you fail to check the item and sign for shipping acceptance and then find damage after the fact, please see the return policy.

If there are minor scratches / dings on the unit that you deem acceptable, you may accept the delivery but be sure to note the scratches / dents on the bill of lading before you sign it.

For MAJOR damage, refuse the delivery and the trucking company will contact our office to discuss.

To expedite a replacement unit, please contact us at (1-762-435-4822 (1-762-4FLHVAC) and we will get another unit shipped out as soon as possible.

Prior to scheduling an installation date, ensure that all the material has been received and is in good shape. Also, if you need assistance locating an installer in your area, please call us and we can assist.

Price Match Policy

The purpose of the HVAC Warehouse Price Match Policy is to ensure that we are the HVAC provider of choice for the value-oriented customer, putting the customer first by offering the best value available.


Guidelines
For retail: We will attempt to match any competitor’s price, on any exact item (brand/ model must match) merchandise normally stocked as active in our stores’.


Redemption
To use the HVAC Warehouse Price Match Policy, the customer must contact HVAC at (1-762-435-4822 (1-762-4FLHVAC) and provide the URL for the matching item. The price must be from a valid reseller of HVAC equipment and must be a “New” item as we do not price match “scratch and dent” or “like-new’ items

Refunds will be granted if item is returned in same condition as shipped “NEW and in the original Packaging”. 
Any item that is returned and is either not in the original Packaging or is damaged in any way, the Customer will be partially refunded at HVAC Warehouse’s discretion of revised resale value. 
Refunds will be granted for items that have been shipped and received within 14 days of shipment receipt date. 
The Customer will be responsible for all shipping charges. 
If the order was made in error and shipping has already taken place, the Customer will be responsible to cover the shipping fees both to and from the customer's location.

This system comes with Free Thermostat and Heat Strips up to 10 kw Heat W/O Breaker for Free!!

Call us at (1-762-435-4822) or message us to specify the heat strip needed or if other accessories are needed.

-------------------------------
-------------------------------
















Listing and template services provided by inkFrog Open.